top of page

This Chip is for the Swapped non- Vtec D15, D16 in to VTEC D15 / D16 Head SOHC Motor in to 1988 to 2000 Civic, Del sol, Integra, CRX Using obd1 VTEC ECU P28 P72 P08 P30 P61 & P91 or the Converted Non-VTEC ecu to vtec spec

 

1996 to 2000 civic integra you must use the Obd2 to Obd1 step down harness and the chipped / Socketed obd1 ecu to use this chip

 

This Tuned  Chip for D series Mini-ME engine Setup, this chip Has the power and torque throughout the entire 8000 RPM, This is good for drag / Circuit racing.

 

Chip modifies the timing / Fuel curve to increase horsepower throughout the power band. Depending on your engine Setup, expect 6 - 14 horsepower just from this chip

 

Custom Tuned D15, D16 Chip Info

VTEC Enable: 4900 RPM

REV Limit: 8000 rpm

Idle: 850 rpm

Knock sensor: DISABLE / or Enable

speed limiter DISABLE

02 : DISABLE / or Enable

 

Shift Light : ( if you want the shift light. Must let me know which RPM you want it set at)

 

BONUS: 2 Step Launch (OPTIONAL with Request, and only will work with hydro Tranny with the Hydro speed sensor,) It will not work with the cable tranny with the mechanical speed sensor, If you want the 2 Step launch please do leave a note when you buy the Chip

 

I can also disable IAVC, VTEC speed check, Oil pressure switch and other sensor as well

 

EG, EF, SIR, SI, EF9, EM1, EF9, CRX, CIVIC, INTEGRA, DEL SOL

 

IF THE ECU IS NOT SOCKETED THEN PLEASE LOOK IN MY OTHER ITEM FOR SALE AND YOU WILL FIND THE CHIPPING KIT TO MODIFY THE OBD1 ECU, IF YOU HAVE ANY QUESTION DONT HESITATE TO ASK

Mini ME D15 / D16 VTEC Head Tuned Base Map P28, P30, P72, P08, P61, P91 ECU

$23.97Price
0.05 Kilograms
    bottom of page